APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 9 Blow guns/nozzles Type Thread male Thread female RN M12x1.25-18 MS M 12 x 1.25 G 1 / 8 “ RN M12x1.25-14 MS M 12 x 1.25 G 1 / 4 “ RN M12x1.25-38 MS M 12 x 1.25 G 3 / 8 “ Adapters for nozzle assemblies in aluminium blow guns PN 16 Nozzles for blow guns - multi-channel fan nozzles quiet Pressure range: Max. 6 bar Temperature range: POM: Max. +50°C, PP: Max. +60°C, aluminium: Max. +200°C, AISI 316L: Max. +550°C Suitable: Multi-channel nozzles are particularly quiet and economical. They are particularly suitable for large area blo- wing-off of water or dust as well as blowing out and further transport of stampings, plastic and elastic mouldings. Warning: For screwing into imperial nozzles in BLP 14: Thread adapter type RN M12x1.25-14 MS B Air consumption: 466 l/min at 4 bar Pressure range: Max. 6 bar Temperature range: ABS: Max. +50°C, zinc: Max. 90°C Suitable: Multi-channel nozzles are particularly quiet and economical. They are particularly suitable for large area blo- wing-off of water or dust as well as blowing out and further transport of stampings, plastic and elastic mouldings. FACH R BLP FACH R BLP ZN G 1 / 4 “* FACH R BLP M12 FACH R BLP M12 ZN M12 x 1.25 * not suitable for BLP 14 blow gun! Please use type FACH R BLP M12 Nozzles for blow guns - multi-channel round nozzles quiet Materials: Nozzle inserts: Hard-PVC Temperature range: Max. +90°C Air consumption: 150 l/min at 4 bar Powerful, focussed point air jet, lower noise level. Up to 12 dB(A) quieter than conventional single bore nozzles. SOFTY M128 SOFTY M128 ES M12 x 1.25 Nozzles for blow guns - softy round quiet zinc ABS Length Height** Width** SOFTY 614 M12* --- 50 6 14 530 l/min. M 12 x 1.25 SOFTY 45215 M12 --- 100 4.5 21.5 350 l/min. M 12 x 1.25 SOFTY 429 M12 --- 100 4 29 700 l/min. M 12 x 1.25 SOFTY 621 M12 --- 100 6 21 665 l/min. M 12 x 1.25 SOFTY 614* --- 50 6 14 530 l/min. G 3 / 8 “ SOFTY 45215 SOFTY 45215 ES 100 4.5 (5.5) 21.5 (22.5) 350 l/min. G 3 / 8 “ SOFTY 429 SOFTY 429 ES 100 4 (5) 29 (31) 700 l/min. G 3 / 8 “ SOFTY 621 SOFTY 621 ES 100 6 (7.5) 21 665 l/min. G 3 / 8 “ SOFTY 629 SOFTY 629 ES 100 6 (7) 29 (30) 1166 l/min. G 3 / 8 “ * body zinc-plated steel, ** values in parentheses for type AISI 316L Nozzles for blow guns - softy quiet B B B FACH F BLP 47 FACH F PP 47 FACH F ALU 51 416 l/min. G 1 / 4 “ FACH F BLP 25 25 --- --- 180 l/min. G 1 / 4 “ FACH F BLP 25 M12 25 --- --- 180 l/min. M12 x 1.25 Special nozzle made of AISI 316L FACH F ES 42 416 l/min. G 1 / 4 “ FACH F 70 ES 70 780 l/min. G 1 / 4 “ Eco-Line made of ABS (blue) FACH F BLP E 47 550 l/min. R 1 / 4 “ Materials: Nozzle inserts: Hard-PVC Temperature range: Max. +90°C Warning: For screwing into imperial nozzles in BLP 14: Thread adapter type RN M12x1.25-38 MS Material: Aluminium anodised Advantages: All extensions can be combined with one another to form an even larger length selection. On the input side, they are equipped with a rotating lock in order to position the tube correctly with the nozzle. They can be out- fitted with all nozzles with an M 12 x 1.25 connection thread. VLR 150 OD VLR 150 G OD 150 M 12 x 1.25 VLR 300 OD VLR 300 G OD 300 M 12 x 1.25 VLR 450 OD VLR 450 G OD 450 M 12 x 1.25 VLR 800 OD VLR 800 G OD 800 M 12 x 1.25 Extension tubes without nozzles for blow guns type VLR ... G OD (straight) type VLR ... OD (curved) ü Outstanding value! Thread male Type aluminium Type PP (FDA compliant) Type POM (blue) Air consumption at 4 bar Thread female/male Tube length Type brass nickel-plated Type AISI 316L Type AISI 316L Type ABS Type zinc Type aluminium Thread male Thread male Thread male Air consumption at 4 bar Type curved Type straight 526 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl