APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 8 Safety valves Type DN Thread Reaction pressure Blow-off capacity SV 12 13-** ES 13 G 1 / 2 “ 0.05 - 10 bar 38 - 762 m³/h SV 34 19-** ES 19 G 3 / 4 “ 0.05 - 6 bar 40 - 589 m³/h SV 10 22-** ES 22 G 1“ 0.04 - 10 bar 34 - 935 m³/h SV 114 23-** ES 23 G 1 1 / 4 “ 0.08 - 10 bar 78 - 2560 m³/h SV 112 30-** ES 30 G 1 1 / 2 “ 0.08 - 10 bar 129 - 4200 m³/h SV 20 35-** ES 35 G 2“ 0.05 - 10 bar 152 - 4850 m³/h ** please enter the reaction pressure TÜV safety valves permanently set and sealed for low pressures (0.04-10 bar) TÜV safety valves made of brass and stainless steel Materials: Body: AISI 316Ti, spring: AISI 301, seal: FKM Temperature range: -20°C to max. +130°C Media: Compressed air and other non-toxic non-inflammable gases Note: These valves have been type approved and can only be supplied non-adjustable. Optional: EPDM seal (-40°C to max. +130°C) -EP F Reaction pressure starting at 0.04 bar! Order example: SV 12 13 - ** ES ** Standard type F Designation for the options: Seal made of EPDM . . . -EP Required reaction pressure (see table) G SW h H G Pressure range bar H h SW G 3 / 8 “ 0.2 - 8.5 75 12 27 G 3 / 8 “ 8.6 - 40 95 12 27 G 3 / 8 “ 40.1 - 50 120 12 27 G 1 / 2 “ 0.2 - 8.5 75 14 27 G 1 / 2 “ 8.6 - 40 95 14 27 G 1 / 2 “ 40.1 - 50 120 14 27 G 3 / 4 “ 0.2 - 8.5 75 16 32 G 3 / 4 “ 8.6 - 40 95 16 32 G 3 / 4 “ 40.1 - 50 120 16 32 DN 10 G Pressure range bar H* h SW* G 1 / 4 “ 0.2 - 20 55 (63) 10 17 (22) G 1 / 4 “ 20.1 - 39.9 75 10 20 (22) G 1 / 4 “ 40.0 - 50 82 10 20 (22) G 3 / 8 “ 0.2 - 14.2 63 12 20 (22) G 3 / 8 “ 14.3 - 39.9 75 12 20 (22) G 3 / 8 “ 40.0 - 50 82 12 20 (22) G 1 / 2 “ 0.2 - 14.2 63 14 24 G 1 / 2 “ 14.3 - 39.9 75 14 24 G 1 / 2 “ 40.0 - 50 82 14 24 * values in brackets apply to type stainless steel DN 8 TÜV Coupling sockets NW7 from page 150 Compressed air reservoir from page 514 Pressure regulator made from stainless steel and brass from page 355 TÜV safety valves permanently set and sealed DN 10 (0.2 - 50 bar) Thread Reaction pressure 6 bar SV 38 10-6 MS SV 38 10-6 MSV SV 38 10-6 ES SV 38 10-6 ES2A G 3 / 8 “ 281 m³/h SV 12 10-6 MS SV 12 10-6 MSV SV 12 10-6 ES SV 12 10-6 ES2A G 1 / 2 “ 281 m³/h SV 34 10-6 MS SV 34 10-6 MSV SV 34 10-6 ES SV 34 10-6 ES2A G 3 / 4 “ 281 m³/h Reaction pressure 8 bar SV 38 10-8 MS SV 38 10-8 MSV SV 38 10-8 ES SV 38 10-8 ES2A G 3 / 8 “ 363 m³/h SV 12 10-8 MS SV 12 10-8 MSV SV 12 10-8 ES SV 12 10-8 ES2A G 1 / 2 “ 363 m³/h SV 34 10-8 MS SV 34 10-8 MSV SV 34 10-8 ES SV 34 10-8 ES2A G 3 / 4 “ 363 m³/h Reaction pressure 11 bar SV 38 10-11 MS SV 38 10-11 MSV SV 38 10-11 ES SV 38 10-11 ES2A G 3 / 8 “ 485 m³/h SV 12 10-11 MS SV 12 10-11 MSV SV 12 10-11 ES SV 12 10-11 ES2A G 1 / 2 “ 485 m³/h SV 34 10-11 MS SV 34 10-11 MSV SV 34 10-11 ES SV 34 10-11 ES2A G 3 / 4 “ 485 m³/h Reaction pressure 16 bar SV 38 10-16 MS SV 38 10-16 MSV SV 38 10-16 ES SV 38 10-16 ES2A G 3 / 8 “ 690 m³/h SV 12 10-16 MS SV 12 10-16 MSV SV 12 10-16 ES SV 12 10-16 ES2A G 1 / 2 “ 690 m³/h SV 34 10-16 MS SV 34 10-16 MSV SV 34 10-16 ES SV 34 10-16 ES2A G 3 / 4 “ 690 m³/h * at 0°C/760 Torr Materials: Body: Brass, AISI 316Ti or AISI 316, seal: FKM Temperature range: -25°C to max. +180°C Media: Compressed air and other non-toxic non-inflammable gases, blown-off freely Note: These valves have been type approved and can only be supplied non-adjustable. Optional: NPT thread -NPT , fixed pressure between 0.2 and 50 bar, TÜV adjustment certificate F Order example: SV 38 10 - ** MS ** Standard type F Required reaction pressure (between 0.2 and 50 bar) Designation for the options: NPT thread . . . . . . . . . . . . . . . . . . . . . -NPT Outstanding value! Enter the reaction pressure Available 0.2 to 50 bar from inventory stock! TÜV Blow-off capacity* Type brass nickel-plated Type brass Type AISI 316Ti Type AISI 316 Contact us for technical details Contact us for manual tools APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 519